OWT-VA Signal Isolation Converter (17.5mm)

The OWT series converters/distributors are primarily designed for conversion and isolation in general signal loops, such as 4~20mA, 0~10V, RTD-PT100Ω, and AC voltage/current signals. A complete range of models is available. This slim converter/distributor provides two signal outputs (isolated between outputs) or a 24V power supply for transmitters. The switchable power supply also facilitates installation. Power, input, and output indicator lights and pluggable terminals are located on the top for easy on-site installation and monitoring of operating status.

Features

• Optional DIP switch available for switching between six standard output signals: 0-5V/0~10V/1~5V/2~10V/4~20mA/0~20mA.
• Dual-loop outputs are fully isolated, allowing selection of different signals.
• Power, input, and output LED indicators are included for easy monitoring of on-site operating status.
• The specification selection table allows you to specify a precision of 0.1%.
• 17.5mm thin 35mm guide rail mounting.
• Designed in accordance with CE international standards and specifications.

Functional Specifications

OWT-VA（Voltage and Current）

Input Range DC/AC		Input Impedance	Input Range DC/AC		Input Impedance
Voltage	0-50 / 0-100 mV	≥ 5MΩ	Current	0-1.999 mA	100Ω
	0-199.9 mV	≥ 5MΩ		0-19.99 mA	10Ω
	0-1.999 V	≥ 1MΩ		0-199.9 mA	1Ω
	0-19.99 V	≥ 1MΩ		0-1.999 A	0.05Ω
	0-199.9 V	≥ 1MΩ		0.5.000 A	0.02Ω
	0-300.0 V	≥ 2MΩ		-	-
	0-600.0 V	≥ 2MΩ		-	-

Accuracy

Exchange: ≤ ±0.5% of FS (as specified by the customer when ordering)

DC: ≤ ±0.2% of FS (as specified by the customer when ordering)

DC: ≤ ±0.1% of FS (optional specification)

≤ ±2% of FS (after selection via toggle switch)

Input Loss

Alternating current: ≤ 0.1VA

AC voltage: ≤ 0.15VA

Model Specifications

OWT-VA-Output Circuit-Input Range-Output Signal 1/Output Signal 2-Operating Power Supply-(Optional Function)

---