OWT-TR Signal Isolation Converter (17.5mm)

Model: OWT-TR

• Optional DIP switch available for switching between six standard output signals: 0-5V/0~10V/1~5V/2~10V/4~20mA/0~20mA.
• Dual-loop outputs are fully isolated, allowing selection of different signals.
• Power, input, and output LED indicators are included for easy monitoring of on-site operating status.
• The specification selection table allows you to specify a precision of 0.1%.
• 17.5mm thin 35mm guide rail mounting
• Designed in accordance with CE international standards and specifications

OWT-TC Thermocouple Temperature Signal Isolation Converter (17.5 mm)

Model: OWT-TC

• The room temperature compensation uses a high-precision temperature IC, ensuring that the room temperature compensation error of the isolation converter is less than ±0.5℃ across the entire operating temperature range.
• Optional DIP switch for switching output signals: six standard output signals available: 0-5V/0~10V/1~5V/2~10V/4~20mA/0~20mA. Users can switch between these signals themselves.
• 100ms high-speed response signal output, suitable for precision temperature control circuits.
• Dual-loop outputs are fully isolated, allowing selection of different output signals.
• It features power, input, and output LED indicators for easy monitoring of on-site operating status.
• The isolation converter is only 17.5mm wide and can be installed on a standard 35mm DIN rail.

OWT-PR Signal Isolation Converter (17.5mm)

Model: OWT-PR

• Optional DIP switch available for switching between six standard output signals: 0-5V/0~10V/1~5V/2~10V/4~20mA/0~20mA.
• Dual-loop outputs are fully isolated, allowing selection of different signals.
• Power, input, and output LED indicators are included for easy monitoring of on-site operating status.
• The specification selection table allows you to specify a precision of 0.1%.
• 17.5mm thin 35mm guide rail mounting
• Designed in accordance with CE international standards and specifications

OWT-VA Signal Isolation Converter (17.5mm)

Model: OWT-VA

• Optional DIP switch available for switching between six standard output signals: 0-5V/0~10V/1~5V/2~10V/4~20mA/0~20mA.
• Dual-loop outputs are fully isolated, allowing selection of different signals.
• Power, input, and output LED indicators are included for easy monitoring of on-site operating status.
• The specification selection table allows you to specify a precision of 0.1%.
• 17.5mm thin 35mm guide rail mounting
• Designed in accordance with CE international standards and specifications

Display-type multi-functional signal isolation transmitter (one-to-one/one-to-two/one-to-three)

Model: OWX

• This series of transmitters uses a three-color LCD display screen to provide intuitive visualization of input and output values.
• It features built-in 18-bit A/D input and 15-bit D/A output, with a fast sampling rate of approximately 200 milliseconds.
• Inputs support multiple forms such as thermocouples, RTDs, mA, and voltage (V/mV), while outputs can be set to 4-20 mA, 0-20 mA, 0-10 V, 0-5 V, 1-5 V, and 2-10 V, and RS-485/Modbus RTU communication is optional.
• The product features a password lock function, sensor disconnection detection, and a fully isolated design (isolation of power supply, input, and output) to ensure process safety and signal stability.

TT Temperature Signal Converter

• The TT temperature signal converter adopts a two-wire loop power supply design (DC 16 ~ 36 V) and can directly output a 4-20 mA signal to instruments, recorders or PLC analog input modules.
• The product features linear temperature output and has built-in cold junction compensation and zero-point and full-scale adjustment mechanisms, allowing for precise calibration according to the actual application environment.
• The outer shell is made of UL94 V-0 flame-retardant ABS material, and is lightweight (only 50 g). It can be installed on the temperature probe connector and has good heat and moisture resistance to ensure long-term stable operation.

TTI-D Temperature Signal Isolation Converter

• The TTI-D features a large round head mounting design, making it suitable for direct installation on temperature sensors or sensor heads, facilitating on-site deployment and replacement.
• The input supports thermocouples and Pt100 Ω platinum resistors, and the desired output temperature range can be set through dedicated software. This flexibility allows it to meet different process requirements.
• The output is a two-wire 4-20 mA loop power supply design with built-in full electrical isolation to ensure stable signal and prevent noise interference.
• Suitable for equipment temperature monitoring, process signal integration, automation control, or remote data transmission.

OWTP Temperature Signal Converter

• OWTP's high-precision temperature signal converter can convert various thermocouple or RTD (resistor-to-electrical) signals into a standard 4-20 mA current output.
• It features precise linearization output, cold junction compensation, and high anti-interference design, enabling stable operation in harsh environments.
• The product is compact and easy to install, making it particularly suitable for temperature monitoring and process control systems of various temperature sensing rods or mechanical equipment.