Multifunction Process Calibrator – PIE 820

Lighten up your toolbox

• Pocket sized calibrator replaces toolbox of single function devices

Technician friendly operation

• Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads

Use it as a milliamp and voltage calibrator

• Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC and 0.00 to 80.00 mV
• Read to 24.00 mA, 00.00 to 10.,25 VDC, 0.0 to 60.0 VDC, 00.00 to 80.00 mV
• Simulate 2 Wire transmitters
• Power up transmitters and loops with built-in 24 V power supply
• Simplify HART hook ups with built in 250 ohm resistor

Calibrate directly in temperature (°C & °F)

• The PIE 820 works with the instruments you use
• Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II)
• RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)
• Copper 10 & 50 Ohm, Nickel 110 and 120 Ohm

Checkout flow and vibration systems

• Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99
• Hz, 9999.9 Hz, 20.000 kHz

Troubleshoot loop & wiring problems

• Beep out connections with the built-in continuity checker

Easy to read

• Turn on the backlight & easily see the display in dark areas of the plant

Quickly set any three outputs plus automatic stepping & ramping

• Easily set any value quickly with the adjustable EZ-DIAL; store any three output settings for instant recall with the EZ-CHECK switch
• Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span
• Select RAMP to smoothly increase and decrease the output between Zero and Span
• Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds

Includes Rubber Boot, Deluxe Hands Free Carrying Case & mV/RTD Test Leads (020-0820)

---

If other specifications are required, please contact us to discuss details.